Saturday, December 28, 2013

SEASONS GREETINGS #2: WOODBURNINGS

http://lumberjocks.com/assets/pictures/members/211655-50x50.jpg


WELL if it hadn’t been for my burnings a lot of my family would not of gotten any Christmas from me. It made me feel good to give them and they all Loved what they got. Some of them asked if I was for sure I wanted to give certain ones to them. well it would of made a little money, but what the hey, I can always burn another one of that type. I missed two of them, but that will be made real easy corrected. so This Christmas came off was a real good holiday. I always wanted it to be the more I can give the better, OK sometimes I wish for a little more of receiving but it pans out to my good.

For the last three weeks I haven’t been able to get out to my shop. If it gets below 30 than I can’t get lout there. and I have COME DOWN WITH THIS BUG THAT IT GOING AROUND TWICE, SO WHEN IT WARMS UP A LITTLE I’ll BE ABLE TO GO OUT AND GET BACK TO WORK.

sorry about the capitol letters my fingers are bigger than the keys and I tend to hit the cap button to often.




Source: LumberJocks.com



SEASONS GREETINGS #2: WOODBURNINGS

Building a Chevalet de Marqueterie #8: Bolting everything together

https://s3.amazonaws.com/ljimg/myhvi5p.jpg


Before moving on, I needed to get everything together in such a way that it wont fall apart on me as I test and fit everything. So I went to the hardware store to buy nuts and bolts. But the bolts were too expensive as I am working on a limited budget. So I bought threaded rod instead..



And the used my brace and drilled all the holes, and then cut the rod to fit and bolted it all together.
Here is the main column with the spacer and the front leg,


Then the face plate holding on the arm, and the clamp arm.


Drilled the hole for the chain in the seat, and made the foot clamp and guide block,


Then I drilled the hole for the wheels and glued in the axles,


Drawing the faces for the clamp.


I also drilled some holes in the support arm and screwed in some inset nuts for the vertical and horizontal adjustors. Bringing it all together to this point..


I am at the point where I need to start making the saw frame and the saw frame hardware. Now.. this is where I am at a distinct disadvantage. I have never seen a completed one of these in person, let alone use one. Even though I have the internet and email and lots of other resources, having some sort of personal experience with one would be the best resource of all.




Source: LumberJocks.com



Building a Chevalet de Marqueterie #8: Bolting everything together

Friday, December 27, 2013

Test Post from New Finish Parking Lots LLC

Test Post from New Finish Parking Lots LLC http://www.newfinishparkinglots.com

Friday, November 8, 2013

Sealcoating with New Finish Parking Lots LLC

http://www.youtube.com/v/LkEvkw3J4j0?autohide=1&version=3&attribution_tag=-5kc44DJuUELEWxjtRsjMA&autoplay=1&feature=share&showinfo=1&autohide=1