Seating Bench Under Construction #4: The undercarriage done

https://s3.amazonaws.com/ljimg/n0a9g6c.jpg

I took the panels and the legs and I cut biscuit slots. I thought I took pictures but don’t find any so I glued the panels and legs together.

Both ends done.

I decided to use dowels to hold the ends to the stretcher. The plan was to run screws through the panels and then plug the hole. I opted not to do it that way.

I used dowel centers to mark the stretcher.

I then glued the undercarriage together.

Then i had to set the bench seat on to see what it looked like.

Source: LumberJocks.com

Seating Bench Under Construction #4: The undercarriage done