Rodel chair build. #2: Front, sides and back rails.

https://s3.amazonaws.com/lumberjocks.com/n3cyul9.jpg

As previously stated I had picked up 3- 6/4 Cherry boards to use for the lower rails. After running them through the planner to knock them down to 1 1/8”. I ripped enough of the material to 3” to make all the rails. These I marked with chalk as to what they are, hopefully to avoid confusion.

The ends of the side rails are beveled at 4.5

Rodel chair build. #2: Front, sides and back rails.